Welcome to our websites!

8-P-80 Mud Pump

Short Description:


  • Rated Input Power: 597kW (800HP)
  • Stroke Per Minute: 160 SPM
  • Stroke Length: 8 1/2"
  • Gear Ratio: 2.463:1
  • Max. Working Pressure: 5000 psi
  • Max. Liner Size: 6 1/4"
  • Suction Inlet Flange: 8" flange
  • Discharge Outlet Flange: 4" flange, 5000psi
  • Overall Dimension (LxWxH): 13.4x7.82x5 ft
  • Approx Weight: 26974 lb
  • Product Detail

    DESCRIPTION:
    -The P series mud pumps are featured by its compact structure, small weight, and land use and high efficiency and can be equipped with drilling rigs according to the requirements and site conditions.
    -The P series mud pumps are durable and compact and can ensure stable operation. During shallow and middle to deep drilling, the P series mud pumps can meet the special requirements of users.
    -The durable fluid end of P series mud pumps significantly increases the performance of three-cylinder mud pumps. In addition, the independent structure is easy to inspect and maintain.

    Features of Power end in P Series Mud Pumps:
    -The base of the machine frame adopts one-piece welded structure and the seats of the main bearing and transmission bearing are made of one-piece cast steel. The whole pump has good stiffness and strength.
    -The crankshaft adopted a mosaic structure of alloy steel forge with full balance so that it operates very smoothly.
    -The pinion shaft is made of an integral structure and belt pulley or chain wheels may be installed on either or both sides of the shaft.
    -Roller bearings are installed at both ends of the shaft in order to improve the stability in operation and bearing capacity.
    -The gears and crossheads of the bearing are lubricated by splash methods.
    -The integral herringbone gear structure is adopted to ensure that the pump operates smoothly.
    -The extension rods are connected to the crossheads by pinholes, so as to ensure the concentricity of the pump. The packing adopts quad-layer sealing structure, which realizes good seal performance.

    Features of Fluid end in P Series Mud Pumps:
    -The hydraulic cylinder is deployed in an L form so as to keep the liquid flow stable and to reduce vibration and pressure fluctuation.
    -The combined hydraulic cylinders are interchangeable and may be replaced individually.
    -The fast rotary valve cover is easy to remove and install. The cone bolts have a self-locking mechanism that helps to reduce vibration at the valve cover and to ensure the fastening and stability.
    -The piston rod and intermediate rod are jointed by clamps, which is easy to remove and replace.
    -The combined piston rod allows replacing of pistons without the need to disassemble the liners.

    We supply triplex mud pump parts for:
    BOMCO: F-500, F-800, F-1000, F-1300, F-1600, F-1600HL, F-2200HL
    Honghua: HHF500, HHF800, HHF1000, HHF1300, HHF1600, HHF1600HL, HHF2200HL
    QZ: SL3NB-160, SL3NB-1300, QZ3NB-350, QZ3NB500, QZ3NB-800, QZ3NB-1000
    TSC: WF500, WF800, WF1000, WF1300, WF1600, WF2000, WF2200
    EMSCO: F-350, F-500, F-650, F-800, F-1000, F1300, F1600, FB-1300, FB-1600, FC1300, FC1600
    LSNOW: 3NB-800, 3NB-1000, 3NB-1000C, 3NB-1300C
    GARDNER DENVER: PZ-7, PZ-8, PZ-9, PZ-10, PZ-11
    IDECO: T500, T800, T1000, T1300, T1600
    Drillmec: 7T450, 7TS-500/600, 8T300M, 9T-1000, 12T1600, 14T2200
    National: JWS 165, JWS 340/400, 7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-p-200, 14-P-220
    OILWELL: A–350PT, A–560PT, A–600PT, A–850PT, A–1100P, A–1400PT, A–1700PT
    Weatherford: MP-5, MP-8, MP-10, MP-13, MP-16
    Russian: UNBT 950, UNB 600, 8T650, UNBT 1180L, NBT 600, NBT 300, 3PN800-2200
    SPM: 5ZB2500, 5ZB2800, TWS2250, TWS2500, TWS600S
    Halliburton: HT-400, HT-446
    Others: JWS165, JWS340, JWS400, PXL, PAH, TEE-5, and OPI-700 etc.
    Triplex Mud Pump Fluid End Expendables


  • Previous:
  • Next:

  • Write your message here and send it to us