Short Description:

DESCRIPTION：
-The P series mud pumps are featured by its compact structure, small weight, and land use and high efficiency and can be equipped with drilling rigs according to the requirements and site conditions.
-The P series mud pumps are durable and compact and can ensure stable operation. During shallow and middle to deep drilling, the P series mud pumps can meet the special requirements of users.
-The durable fluid end of P series mud pumps significantly increases the performance of three-cylinder mud pumps. In addition, the independent structure is easy to inspect and maintain.

Features of Power end in P Series Mud Pumps：
-The base of the machine frame adopts one-piece welded structure and the seats of the main bearing and transmission bearing are made of one-piece cast steel. The whole pump has good stiffness and strength.
-The crankshaft adopted a mosaic structure of alloy steel forge with full balance so that it operates very smoothly.
-The pinion shaft is made of an integral structure and belt pulley or chain wheels may be installed on either or both sides of the shaft.
-Roller bearings are installed at both ends of the shaft in order to improve the stability in operation and bearing capacity.
-The gears and crossheads of the bearing are lubricated by splash methods.
-The integral herringbone gear structure is adopted to ensure that the pump operates smoothly.
-The extension rods are connected to the crossheads by pinholes, so as to ensure the concentricity of the pump. The packing adopts quad-layer sealing structure, which realizes good seal performance.

Features of Fluid end in P Series Mud Pumps：
-The hydraulic cylinder is deployed in an L form so as to keep the liquid flow stable and to reduce vibration and pressure fluctuation.
-The combined hydraulic cylinders are interchangeable and may be replaced individually.
-The fast rotary valve cover is easy to remove and install. The cone bolts have a self-locking mechanism that helps to reduce vibration at the valve cover and to ensure the fastening and stability.
-The piston rod and intermediate rod are jointed by clamps, which is easy to remove and replace.
-The combined piston rod allows replacing of pistons without the need to disassemble the liners.

We supply triplex mud pump parts for:
BOMCO: F-500, F-800, F-1000, F-1300, F-1600, F-1600HL, F-2200HL
Honghua: HHF500, HHF800, HHF1000, HHF1300, HHF1600, HHF1600HL, HHF2200HL
QZ: SL3NB-160, SL3NB-1300, QZ3NB-350, QZ3NB500, QZ3NB-800, QZ3NB-1000
TSC: WF500, WF800, WF1000, WF1300, WF1600, WF2000, WF2200
EMSCO: F-350, F-500, F-650, F-800, F-1000, F1300, F1600, FB-1300, FB-1600, FC1300, FC1600
LSNOW: 3NB-800, 3NB-1000, 3NB-1000C, 3NB-1300C
GARDNER DENVER: PZ-7, PZ-8, PZ-9, PZ-10, PZ-11
IDECO: T500, T800, T1000, T1300, T1600
Drillmec: 7T450, 7TS-500/600, 8T300M, 9T-1000, 12T1600, 14T2200
National: JWS 165, JWS 340/400, 7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-p-200, 14-P-220
OILWELL: A–350PT, A–560PT, A–600PT, A–850PT, A–1100P, A–1400PT, A–1700PT
Weatherford: MP-5, MP-8, MP-10, MP-13, MP-16
Russian: UNBT 950, UNB 600, 8T650, UNBT 1180L, NBT 600, NBT 300, 3PN800-2200
SPM: 5ZB2500, 5ZB2800, TWS2250, TWS2500, TWS600S
Halliburton: HT-400, HT-446
Others: JWS165, JWS340, JWS400, PXL, PAH, TEE-5, and OPI-700 etc.
Triplex Mud Pump Fluid End Expendables